| Technical
Comparative Specification |
| Particulars: |
Geometry
25 M/C |
Others
Mono Blade Type M/C |
| No. of Saw
Blades |
2 |
1 |
| Blade Motor
Power (Hp) AC |
10 |
30 |
| Vertical
Up-Dn Motor Fast AC |
3.0 |
3.0 |
| Vertical
Up-Dn Motor Slow Feed (Hp) DC |
1.0 |
1.0 |
| Trolley Motor
Power (Hp) AC |
2.0 |
2.0 |
| Hyd. Pump
Motor (Hp) (Power Pack) |
Not Required |
3.0 |
| Hyd. Oil
Capacity in litres approx. |
10 liter
only once |
30-40 litres
gradually consumed |
| Stroke Length |
400 mm |
400 mm |
|
Stroke
Rate/Min.
|
140 |
135-140 |
|
Tension
Provider
|
By Hydraulic
simple 2 Nos.
Jack By hand pressured pumps (Stable Tension) |
By
Hi-pressure
Hi Stroke Multi Oil seal Protected Cylinders with Low-High
Pressure Valve Operated Switching Panels (Unstable Tension
due to Hi Leakages) |
| Max. Block
Size (LxHxW) |
3500 x 2000
x 3500 |
3500 x 2000
x 3500 |
| Cutting Length |
3.5 mtr. |
3.5 mtr. |
| Cutting Height |
2.0 mtr. |
2.0 mtr. |
|
Water
Flow
|
15-20 1Litre/min |
10-25 Litre/MIN |
| Power supply |
415V AC/3
Phase/50 Hz |
415 VAC/3
Phase/50 Hz |
